Menu Close

CNC Routers

Talent T3

Overview

The Talent T3 CNC Router is an industrial grade, panel-processing machine. Although versatile, this router is geared towards cabinetry, signage, plastic fabrication, and fine woodworking. Upgrade this machine with optional auto load and unload attachments. Innovative components make the Talent T3 the leading CNC Router in the industry.

– Compact nesting/panel processing machine

– Three axis

– Cuts materials including wood, plastics, and non-ferrous metals

– Delta servo motors & CNC controls

– Compatible with standard G-Code based CAD/CAM software programs

– Clean Sweep Unloader: Automatic twin vacuum manifolds for table cleaning

– Optional: Auto load and unload attachments

Specifications

Working Range:
x-axis: 49 inches
y-axis: 97 inches
z-axis: 6 inches (tool holder nose to phenolic table)
Vacuum Table/Pump:
4-zone vacuum table with pop-up locator fence
Power: 10 Horsepower 
Flow rate: 250 Cubic meters per hour
Max Traveling Speed (inches per minute):
x-axis: 2,362 IPM
y-axis: 2362 IPM
z-axis: 787 IPM
Main Spindle:
ISO 30 Spindle
Power: 12 HP
Rotating Speed: 18,000 RPM
Collet: ER-32
Automatic Tool Changer:
12 Position traveling carousel with servo positioning
Includes 8 ISO-30 tool holders and 10 ER-32 collets
Boring Block:
9 Spindle independently controlled drill block
32mm Center to center, 10mm standard bit shank
Dust Extraction:
Outlet diameter: 8 inches
Required flowrate: 1000 CFM
Required Supply:
Air pressure: 100 PSI
Voltage: 230V, 3-phase, 60Hz
Amperage: 65 amps
Dimensions/Weight:
150″ L x 78″ W x 91″ H
Approximately 8,600 pounds

Accel 3

Overview

The Accel III CNC Router features automatic clean sweep technology. The router pushes finished material to the unload table, before cleaning and preparing for the next sheet. The machine is compatible with all standard, G-code based CAD/CAM software programs. Upgrade this machine with optional auto load and unload attachments. The Accel is New CNC’s high-performance line of machines. 

– Delta servo motors
– HSD spindle, HSK-63 
– Syntec controls
– 12-position ride along tool changing carousel
– Side alignment
– Clean sweep pusher with dust collection
– Optional: Auto load and unload attachments

Specifications

Working Range:
x-axis: 167.75 inches
y-axis: 84.875 inches
z-axis: 6 inches (tool holder nose to phenolic table)
Vacuum Table/Pump:
4-zone vacuum table with pop-up locator fence
Power: 7.5 Horsepower 
Flow rate: 174 Cubic meters per hour (BECKER Brand)
Max Traveling Speed (inches per minute):
x-axis: 3,144 IPM
y-axis: 3,144 IPM
z-axis: 982 IPM
Main Spindle:
HSK-63 Spindle
Power: 17.7HP HSD Spindle
Rotating Speed: 18,000 RPM
Collet: ER-32
Automatic Tool Changer:
12 Position traveling carousel with servo positioning
Includes 8 HSK-63 tool holders and 10 ER-32 collets
Boring Block:
9 Spindle independently controlled drill block
32mm Center to center, 10mm standard bit shank
Dust Extraction:
Outlet diameter: 8 inches
Required flow rate: 1600 CFM
Required Supply:
Air pressure: 100 PSI
Voltage: 230V, 3-phase, 60Hz
Amperage: 90 amps
Dimensions/Weight:
216″ L x 147″ W x 96″ H
Approximately 11,223 pounds

6-Sided Boring Machine

Overview

The 6-Sided Boring CNC Machine brings automated manufacturing to another level.
Using cutting edge CNC controls and programming, the machine bores holes on the top, bottom, and four edges of material.  Routers are mounted on top & bottom, giving this machine panel-processing capabilities that require 2-sided operation.
Material fixturing is fully automated, even for a one-part batch. The 6-Sided CNC utilizes industry-leading components such as Delta servo motors and 32 MM on-center drill blocks to generate a consistent, reliable, and pace-setting production environment.

Specifications

– Independently selectable top boring head featuring (2) sets of (12) vertical and (6) horizontal drills for a total of (24) vertical and (12) horizontals
– Bottom boring block features (9) independently controlled vertical drills
– Top routing spindle is 5 horsepower, 18,000 RPM
– Bottom routing spindle is 5 horsepower, 18,000 RPM
-Servo controller panel grippers position and move the parts
– Side alignment devise insures proper squaring
– Powered off load conveyor allows finished parts to move on to any additional process
– Automatic lubrication system to all bearings ensure ease of maintenance
– On-board CNC programming through the CNC control
– Minimum panel size: 200 MM x 50 MM
– Maximum panel size: 2,500 MM x 1,200 MM

Auto Load/Unload (ALUL)

Overview

The Auto Load and Unload CNC machine is designed for maximum productivity with minimum labor. Sheets are loaded into the machine via lift table. Panels are then feed into the CNC router automatically for processing. The vacuum table secures parts during the routing and boring process. Finished parts are then moved from the router table to the out-feed table where the operators can stack parts. A vacuum system cleans the dust from the table in preparation for the next cycle. Available in 4 x 8 and 6 x 12 table sizes.

Specifications

4-Zone Vacuum Table: 51″ x 98″ or 63″ x 127″
Spindle:  12 or 18 horsepower
Tool Changer: 12-position carousel for fast tool changes
Boring Head: Standard 9-spindle on 32 MM centers
Vacuum Pump: 10 HP, 250 cubic meter (twin vacuum pumps on 6 x 12 machine)
Controller: Delta with Delta servo amplifiers
New CNC “Clean Sweep” technology: Automatically unloads cut parts and vacuums spoil board

Smart Series

Overview

The SMART Series 2 CNC router is a top performing machine that efficiently delivers consistent finished products. The power transmission is a helical rack and pinion system utilizing a SIX pinion X and Y axis system. The machine is available as a custom build in sizes up to 73” x 288″.

Specifications

– 4-zone Table: 51″ x 98″ or 63″ x 127″
– Spindle: 12.6 HP HSK 63
– Vacuum Pump: 10 HP, 250 cubic meter
– Controller: OSAI
– Servo amplifiers: Yaskawa
– Axes Motion: Balls crew, helical rack, and pinion
– Footprint: 96″ x 127″ or 121″ x 154″
– Weight: 5500 or 7000 LBS
– Optional:
Gear driven lathe attachment 
C-axis
Rotary axis
Aggregates
9-spindle independent boring block

Pod & Rail

Overview

– Modular fixture system, both mechanical and vacuum clamping
– Auto tool measurement
– Electronic hand wheel (MPG)

Specifications

Table: 4′ x 4′ x 2′
Available in single or twin
Rapid Speed:
x-axis: 50m/min
y-axis: 50m/min
z axis: 20m/min
Spindle:  16 HP, HSK63
Servo amplifiers: Yaskawa
Tool Changer: 20 tool auto tool changer
Vacuum Pump: 2 x 7.5 HP Rotary vane
Controller: OSAI
Footprint: Varies based on custom size

5 Axis

Overview

The 5 Axis is designed to machine five faces of your work piece and surface 3D machining. The machine is controlled using a user-friendly operator interface. Industry leading technology makes the 5 Axis machine capable of complex projects.

– 20 Spindle drill block
– Helical rack and pinion X and Y, ballscrew Z axis
– Optional c-axis

Specifications

Working Table: 2500 x 900 MM
Rapid Speed:
x-axis: 50m/min
y-axis: 50m/min
z axis: 20m/min
Spindle: 10 HP, 18000 RPM
Vacuum Pump: 10 HP rotary vane
Servo amplifiers: Yaskawa
Controller: OSAI
Boring Unit: 12 horizontal, 8 vertical

Custom CNC Routers

Overview

New CNC offers custom built machines to fit your manufacturing needs. Machines can be manufactured with custom table sizes, multiple tool changers, custom vacuum zoning, C-axis rotation, aggregate tools, rotary axes, mortise & tenon fixtures, and drill banks.

Specifications

Table Type: Configurable
Spindle: 12.6 – 22 HP HSK 63
Tool Changer: Configurable up to 26 tools
Boring Head: Optional 9-spindle
Vacuum Pump: (2) x 10 HP, 250 cubic meters
Controller: OSAI
Servo Amplifiers: Yaskawa
Axes Motion: Ballscrew, helical rack & pinion
Part Location: Configurable
Options:
– C-axis
– Rotary axis
– Aggregates
– Z-axis