Talent T5 D

The TALENT T5D is the foundation of the NewCNC high-performance line of CNC nesting machines.

It is a three axis, panel-processing machine tool capable of cutting a wide range of materials including wood products, plastics, and non-ferrous metals. The Talent T5 is used extensively in cabinetmaking, closet manufacturing, sign-making, and plastics fabrication. This CNC Router utilizes industry leading components, such as 1.5 KW servo motors, a 16-horsepower spindle, and Delta CNC controls. Rapid speeds of 100 meters/min. (3,937 inches per minute), standard 12 position carousel tool changer, 10 position boring block, 16 horsepower spindle, panel sweep, automatic panel alignment, and pre-configured for auto load and unload are all standard. These are not expensive upgrades as offered by other manufacturers.

Features

16 horsepower router spindle
12-position carousel tool changer
10 horsepower vacuum pumps
10 position boring block
1.5 KW servo motors and amplifiers
3,973 inches per minute rapid speeds
Pre-configured for Auto Load-Unload
“Clean Sweep” pusher and table vacuum
CNC controlled vacuum gates
Superior vacuum hold, multi-zoned table

4x8 CNC Router Specs

Working Range:
x-axis: 49.2 inches
y-axis: 112.5 inches
z-axis: 6 inches (tool holder nose to phenolic table)
Vacuum Table/Pump:
7-zone vacuum table with pop-up locator fence
Power: 1 x 10 horsepower
Flow rate: 250 cubic meters/hour
Max Traveling Speed (inches/minute):
x-axis: 3,973 IPM
y-axis: 3,973 IPM
z-axis: 787 IPM
Main Spindle:
ISO 30 Spindle
Power: 16 HP
Rotating Speed: 3,500 – 21,000 RPM
Collet: ER-32
Automatic Tool Changer:
12 position traveling carousel with servo positioning
Includes 8 ISO-30 tool holders and 8 ER-32 collets
Boring Block:
10 spindle independently controlled drill block
32mm on center
10mm standard bit shank
Dust Extraction:
Outlet diameter: 8 inches
Required flowrate: 1000 CFM
Required Supply:
Air pressure: 100 PSI
Voltage: 230V, 3-phase, 60Hz
Amperage: 45 amps
Table Size:
4 ft x 9 ft

5x10 CNC Router Specs

Working Range:
x-axis: 61.845 inches
y-axis: 122 inches
z-axis: 6 inches (tool holder nose to phenolic table)
Vacuum Table/Pump:
4-zone vacuum table with pop-up locator fence
Power: 2 x 10 horsepower
Flow rate: 250 cubic meters/hour per pump
Max Traveling Speed (inches/minute):
x-axis: 3,973 IPM
y-axis: 3,973 IPM
z-axis: 787 IPM
Main Spindle:
ISO 30 Spindle
Power: 16 HP
Rotating Speed: 3,500 – 21,000 RPM
Collet: ER-32
Automatic Tool Changer:
12 position traveling carousel with servo positioning
Includes 8 ISO-30 tool holders and 8 ER-32 collets
Boring Block:
10 spindle independently controlled drill block
32mm on center
10mm standard bit shank
Dust Extraction:
Outlet diameter: 8 inches
Required flowrate: 1500 CFM
Required Supply:
Air pressure: 100 PSI
Voltage: 230V, 3-phase, 60Hz
Amperage: 75 amps
Table Size:
5 ft x 10 ft

6x12 CNC Router Specs

Working Range:
x-axis: 72 inches
y-axis: 144 inches
z-axis: 6 inches (tool holder nose to phenolic table)
Vacuum Table/Pump:
6-zone vacuum table with pop-up locator fence
Power: 2 x 10 horsepower
Flow rate: 250 cubic meters/hour per pump
Max Traveling Speed (inches/minute):
x-axis: 3,973 IPM
y-axis: 3,973 IPM
z-axis: 787 IPM
Main Spindle:
ISO 30 Spindle
Power: 16 HP
Rotating Speed: 5,000 – 21,000 RPM
Collet: ER-32
Automatic Tool Changer:
12 position traveling carousel with servo positioning
Includes 8 ISO-30 tool holders and 8 ER-32 collets
Boring Block:
10 spindle independently controlled drill block
32mm on center
10mm standard bit shank
Dust Extraction:
Outlet diameter: 8 inches
Required flowrate: 1500 CFM
Required Supply:
Air pressure: 100 PSI
Voltage: 230V, 3-phase, 60Hz
Amperage: 75 amps
Table Size:
6 ft x 12 ft

7x10 CNC Router Specs

Working Range:
x-axis: 84 inches
y-axis: 120 inches
z-axis: 6 inches (tool holder nose to phenolic table)
Vacuum Table/Pump:
6-zone vacuum table with pop-up locator fence
Power: 2 x 10 horsepower
Flow rate: 250 cubic meters/hour per pump
Max Traveling Speed (inches/minute):
x-axis: 3,973 IPM
y-axis: 3,973 IPM
z-axis: 787 IPM
Main Spindle:
ISO 30 Spindle
Power: 16 HP
Rotating Speed: 5,000 – 21,000 RPM
Collet: ER-32
Automatic Tool Changer:
12 position traveling carousel with servo positioning
Includes 8 ISO-30 tool holders and 8 ER-32 collets
Boring Block:
9 spindle independently controlled drill block
32mm on center
10mm standard bit shank
Dust Extraction:
Outlet diameter: 8 inches
Required flowrate: 1500 CFM
Required Supply:
Air pressure: 100 PSI
Voltage: 230V, 3-phase, 60Hz
Amperage: 75 amps
Table Size:
7 ft x 10 ft

7x13 CNC Router Specs

Working Range:
x-axis: 84 inches
y-axis: 156 inches
z-axis: 6 inches (tool holder nose to phenolic table)
Vacuum Table/Pump:
6-zone vacuum table with pop-up locator fence
Power: 2 x 10 horsepower
Flow rate: 250 cubic meters/hour per pump
Max Traveling Speed (inches/minute):
x-axis: 3,973 IPM
y-axis: 3,973 IPM
z-axis: 787 IPM
Main Spindle:
ISO 30 Spindle
Power: 16 HP
Rotating Speed: 5,000 – 21,000 RPM
Collet: ER-32
Automatic Tool Changer:
12 position traveling carousel with servo positioning
Includes 8 ISO-30 tool holders and 8 ER-32 collets
Boring Block:
9 spindle independently controlled drill block
32mm on center
10mm standard bit shank
Dust Extraction:
Outlet diameter: 8 inches
Required flowrate: 1500 CFM
Required Supply:
Air pressure: 100 PSI
Voltage: 230V, 3-phase, 60Hz
Amperage: 75 amps
Table Size:
7 ft x 13 ft

REQUEST QUOTE